Spoon Carbon Bonnet - Integra DC2/DB8 (USDM)
$2,405.00
Catered to the US market, Spoon Sports released a Carbon Bonnet for the USDM model Integra DC2/DB8.
Carbon construction for light weight and strength. Up to half the weight of the factory hood. By reducing the front weight of the car, under steer is greatly reduced and the cars handling is improved. Bonnet pins are not required due to their sturdy construction and molded in hood latches.
Carbon products may discolor due to ultraviolet rays. Applying a UV-protective clear coat is recommended. (This product is unpainted.)
・Always perform a test fit of the product before painting.
・Do not apply heat; allow the product to dry naturally. Heating in environments such as paint booths or near heaters will cause deformation.
・During winter or other times of low temperature, or when humidity is high, allow the entire product to dry at temperatures below 40°C (104°F).
・Do not apply localized heat. This may cause distortion.
Carbon construction for light weight and strength. Up to half the weight of the factory hood. By reducing the front weight of the car, under steer is greatly reduced and the cars handling is improved. Bonnet pins are not required due to their sturdy construction and molded in hood latches.
Carbon products may discolor due to ultraviolet rays. Applying a UV-protective clear coat is recommended. (This product is unpainted.)
・Always perform a test fit of the product before painting.
・Do not apply heat; allow the product to dry naturally. Heating in environments such as paint booths or near heaters will cause deformation.
・During winter or other times of low temperature, or when humidity is high, allow the entire product to dry at temperatures below 40°C (104°F).
・Do not apply localized heat. This may cause distortion.
Catered to the US market, Spoon Sports released a Carbon Bonnet for the USDM model Integra DC2/DB8.
Carbon construction for light weight and strength. Up to half the weight of the factory hood. By reducing the front weight of the car, under steer is greatly reduced and the cars handling is improved. Bonnet pins are not required due to their sturdy construction and molded in hood latches.
Carbon products may discolor due to ultraviolet rays. Applying a UV-protective clear coat is recommended. (This product is unpainted.)
・Always perform a test fit of the product before painting.
・Do not apply heat; allow the product to dry naturally. Heating in environments such as paint booths or near heaters will cause deformation.
・During winter or other times of low temperature, or when humidity is high, allow the entire product to dry at temperatures below 40°C (104°F).
・Do not apply localized heat. This may cause distortion.
Carbon construction for light weight and strength. Up to half the weight of the factory hood. By reducing the front weight of the car, under steer is greatly reduced and the cars handling is improved. Bonnet pins are not required due to their sturdy construction and molded in hood latches.
Carbon products may discolor due to ultraviolet rays. Applying a UV-protective clear coat is recommended. (This product is unpainted.)
・Always perform a test fit of the product before painting.
・Do not apply heat; allow the product to dry naturally. Heating in environments such as paint booths or near heaters will cause deformation.
・During winter or other times of low temperature, or when humidity is high, allow the entire product to dry at temperatures below 40°C (104°F).
・Do not apply localized heat. This may cause distortion.
| Manufacturer Product Code | 61000-DC2-200 |
|---|---|
| Product Type | Interior & Exterior |
| Manufacturer | Spoon Sports |
| Model Year | 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 |
| Make | Acura |
| Model | Integra |
| Short Description | Catered to the US market, Spoon Sports released a Carbon Bonnet for the USDM model Integra DC2/DB8. Carbon construction for light weight and strength. Up to half the weight of the factory hood. By reducing the front weight of the car, under steer is greatly reduced and the cars handling is improved. Bonnet pins are not required due to their sturdy construction and molded in hood latches. Carbon products may discolor due to ultraviolet rays. Applying a UV-protective clear coat is recommended. (This product is unpainted.) ・Always perform a test fit of the product before painting. ・Do not apply heat; allow the product to dry naturally. Heating in environments such as paint booths or near heaters will cause deformation. ・During winter or other times of low temperature, or when humidity is high, allow the entire product to dry at temperatures below 40°C (104°F). ・Do not apply localized heat. This may cause distortion. |
Spoon Products You May Be Interested In
![Spoon Radiator Cap [F TYPE] - Accessories Type F](https://spoonusa.com/media/catalog/product/cache/a2fa11ce76d98b8fadbd76ec8b599928/s/p/sp-all-19045-001_00.jpg)
![Spoon Monoblock Caliper Set [RVS] - S2000 AP1](https://spoonusa.com/media/catalog/product/cache/a2fa11ce76d98b8fadbd76ec8b599928/s/p/sp-45020-mbr-g00_00_1.jpg)
![Spoon Brake Rotor [Front] - Civic](https://spoonusa.com/media/catalog/product/cache/a2fa11ce76d98b8fadbd76ec8b599928/s/p/sp-45251-ek9-000_00.jpg)
![Spoon Brake Pad [Rear] Circuit - Civic FK7](https://spoonusa.com/media/catalog/product/cache/a2fa11ce76d98b8fadbd76ec8b599928/s/p/sp-43022-fk7-c00_00.jpg)
|
|
