Spoon Rear Adjusting Plate for Street - Fit GK5

$355.00
*** Requires rear disc brake conversion for USDM models. ***
Honda OEM Rear Brake Conversion for GK Fit

Fits 2015+ Fit3 GK models.
Made in Japan.
S50C Stainless Steel construction.

Reduces the rear toe-in by replacing the factory caliper mounting bracket to change the angle of the rear hub. The factory rear torsion beam does not allow for any alignment changes and has a set toe-in of 0°30′. The Spoon Rear Adjusting Plate for Street changes this to 0° for better turn-in handling and less understeer. Constructed of high strength S50C stainless steel and tested for safety. Additional rigidity also improve rear braking stability and performance.

Street verion:
Toe: IN 0°30′ → 0°
Camber: No Change.

Race verion:
Toe: IN 0°30′ → 0°
Camber: -1°30′ → -2°30′
*** Requires rear disc brake conversion for USDM models. ***
Honda OEM Rear Brake Conversion for GK Fit

Fits 2015+ Fit3 GK models.
Made in Japan.
S50C Stainless Steel construction.

Reduces the rear toe-in by replacing the factory caliper mounting bracket to change the angle of the rear hub. The factory rear torsion beam does not allow for any alignment changes and has a set toe-in of 0°30′. The Spoon Rear Adjusting Plate for Street changes this to 0° for better turn-in handling and less understeer. Constructed of high strength S50C stainless steel and tested for safety. Additional rigidity also improve rear braking stability and performance.

Street verion:
Toe: IN 0°30′ → 0°
Camber: No Change.

Race verion:
Toe: IN 0°30′ → 0°
Camber: -1°30′ → -2°30′
More Information
Manufacturer Product Code 43250-GK5-000
Product Type Suspension System
Manufacturer Spoon Sports
Model Year 2015, 2016, 2017, 2018, 2019, 2020
Make Honda
Model Fit
Short Description *** Requires rear disc brake conversion for USDM models. ***
Honda OEM Rear Brake Conversion for GK Fit

Fits 2015+ Fit3 GK models.
Made in Japan.
S50C Stainless Steel construction.

Reduces the rear toe-in by replacing the factory caliper mounting bracket to change the angle of the rear hub. The factory rear torsion beam does not allow for any alignment changes and has a set toe-in of 0°30′. The Spoon Rear Adjusting Plate for Street changes this to 0° for better turn-in handling and less understeer. Constructed of high strength S50C stainless steel and tested for safety. Additional rigidity also improve rear braking stability and performance.

Street verion:
Toe: IN 0°30′ → 0°
Camber: No Change.

Race verion:
Toe: IN 0°30′ → 0°
Camber: -1°30′ → -2°30′
 
Spoon Rear Adjusting Plate for Street - Fit GK5
Copyright © 2024 Spoon Sports USA. All rights reserved.