Spoon S-Tai Rear Bumper - Civic FL5
$3,180.00
Like the front bumper, a full-bumper design was adopted, and FRP material was used. The product design was made using know-how accumulated through racing activities and advanced CFD analysis. It was developed through repeatedly on-track testing with a Super Taikyu race car.
The central grille of the bumper suppresses the parachute effect, while the grilles on both sides effectively vent pressure inside the wheelhouse, creating a pressure difference that generates downforce. In addition, the airflow guide plates swept upward at the rear, serving as a diffuser, actively extracting air from under the floor, increasing air flow velocity to generate stable downforce. Synergistic effects with the diffuser’s underbody flow control deliver maximum aerodynamic performance.
・FRP black gelcoat finish, so painting is required.
・Be sure to pre-match the product before painting.
・In an environment such as a paint booth/heater, the product will be deformed, so please dry it naturally without applying heat.
・When the temperature is low, such as in winter, or when the humidity is high, dry the entire body at 40°C or less.
・Do not heat it partially. It can cause strain.
The central grille of the bumper suppresses the parachute effect, while the grilles on both sides effectively vent pressure inside the wheelhouse, creating a pressure difference that generates downforce. In addition, the airflow guide plates swept upward at the rear, serving as a diffuser, actively extracting air from under the floor, increasing air flow velocity to generate stable downforce. Synergistic effects with the diffuser’s underbody flow control deliver maximum aerodynamic performance.
・FRP black gelcoat finish, so painting is required.
・Be sure to pre-match the product before painting.
・In an environment such as a paint booth/heater, the product will be deformed, so please dry it naturally without applying heat.
・When the temperature is low, such as in winter, or when the humidity is high, dry the entire body at 40°C or less.
・Do not heat it partially. It can cause strain.
Like the front bumper, a full-bumper design was adopted, and FRP material was used. The product design was made using know-how accumulated through racing activities and advanced CFD analysis. It was developed through repeatedly on-track testing with a Super Taikyu race car.
The central grille of the bumper suppresses the parachute effect, while the grilles on both sides effectively vent pressure inside the wheelhouse, creating a pressure difference that generates downforce. In addition, the airflow guide plates swept upward at the rear, serving as a diffuser, actively extracting air from under the floor, increasing air flow velocity to generate stable downforce. Synergistic effects with the diffuser’s underbody flow control deliver maximum aerodynamic performance.
・FRP black gelcoat finish, so painting is required.
・Be sure to pre-match the product before painting.
・In an environment such as a paint booth/heater, the product will be deformed, so please dry it naturally without applying heat.
・When the temperature is low, such as in winter, or when the humidity is high, dry the entire body at 40°C or less.
・Do not heat it partially. It can cause strain.
The central grille of the bumper suppresses the parachute effect, while the grilles on both sides effectively vent pressure inside the wheelhouse, creating a pressure difference that generates downforce. In addition, the airflow guide plates swept upward at the rear, serving as a diffuser, actively extracting air from under the floor, increasing air flow velocity to generate stable downforce. Synergistic effects with the diffuser’s underbody flow control deliver maximum aerodynamic performance.
・FRP black gelcoat finish, so painting is required.
・Be sure to pre-match the product before painting.
・In an environment such as a paint booth/heater, the product will be deformed, so please dry it naturally without applying heat.
・When the temperature is low, such as in winter, or when the humidity is high, dry the entire body at 40°C or less.
・Do not heat it partially. It can cause strain.
| Manufacturer Product Code | 71501-FL5-000 |
|---|---|
| Product Type | Interior & Exterior |
| Manufacturer | Spoon Sports |
| Model Year | 2023, 2024, 2025, 2026 |
| Make | Honda |
| Model | Civic |
| Short Description | Like the front bumper, a full-bumper design was adopted, and FRP material was used. The product design was made using know-how accumulated through racing activities and advanced CFD analysis. It was developed through repeatedly on-track testing with a Super Taikyu race car. The central grille of the bumper suppresses the parachute effect, while the grilles on both sides effectively vent pressure inside the wheelhouse, creating a pressure difference that generates downforce. In addition, the airflow guide plates swept upward at the rear, serving as a diffuser, actively extracting air from under the floor, increasing air flow velocity to generate stable downforce. Synergistic effects with the diffuser’s underbody flow control deliver maximum aerodynamic performance. ・FRP black gelcoat finish, so painting is required. ・Be sure to pre-match the product before painting. ・In an environment such as a paint booth/heater, the product will be deformed, so please dry it naturally without applying heat. ・When the temperature is low, such as in winter, or when the humidity is high, dry the entire body at 40°C or less. ・Do not heat it partially. It can cause strain. |
Spoon Products You May Be Interested In
-
![Spoon Under panel Kit - CR-Z ZF1]()
Spoon Under panel Kit - CR-Z ZF1$520.00 -
![Spoon Driveshaft Set - Civic FD2]()
Spoon Driveshaft Set - Civic FD2$2,850.00
![Spoon Tail Silencer [N1 Type] - Civic FD2](https://spoonusa.com/media/catalog/product/cache/a2fa11ce76d98b8fadbd76ec8b599928/s/p/sp-18030-fd2-011_00.jpg)
![Spoon N1 Muffler Kit [Titanium] - NSX NA1](https://spoonusa.com/media/catalog/product/cache/a2fa11ce76d98b8fadbd76ec8b599928/s/p/sp_18000-na1-000_00.jpg)
|
|
